Brother MFC J6510DW - Manual (Page 3)

3
d
Fan the stack of paper well to avoid paper jams
and misfeeds.
e
Gently put the paper into the paper tray (For
MFC-J6710DW, tray #1) print side down and
top edge first.
f
Gently adjust the paper side guides to the
paper with both hands. Make sure that the
paper side guides touch the edges of the
paper.
g
Close the output paper tray cover. Check that
the paper is flat in the tray and below the
maximum paper mark a.
h
Slowly push the paper tray completely into the
machine.
i
While holding the paper tray in place, pull out
the paper support a until it clicks, and then
unfold the paper support flap b.
Note
DO NOT push the paper in too far.
1
Note
(For MFC-J6710DW)
For information about tray #2 (the lower tray), see
Loading paper in paper tray #2 in chapter 2 of the
Basic User’s Guide.
1
2