Brother HL-3075CW - Manual (Page 32)

Configuring your machine for a wireless network (For HL-3075CW)
22
3
Step by step chart for wireless network configuration
3
For Infrastructure mode
3
a Confirm your network environment. (See page 23.)
b Confirm your wireless network setup method. (See page 24.)
c Configure your machine for a wireless network. (See page 27.)
Wireless configuration and installing printer driver have been completed.
o Infrastructure mode
Connected to a computer with an access point
Using the Brother
installer application
(Recommended)
Using the WPS/AOSS
control panel menu
(if your wireless access
point supports either Wi-
Fi Protected Setup
or AOSS™)
Using the PIN Method of
Wi-Fi Protected Setup
(if your wireless access
point supports Wi-Fi
Protected Setup)
Temporarily using a USB cable
Configuring your machine for a wireless network
(For Windows
®
)
See page 28.
(For Macintosh)
See page 30.
See page 32. See page 36.
Installing the printer driver
See the Quick Setup Guide
See the Quick Setup
Guide
(For Windows ® )
See page 38.
(For Macintosh)
See page 42.