Brother HL-3075CW - Manual (Page 64)

Control panel features
54
8
Wired Enable (For HL-3075CW wired network only)
8
If you want to use the wired network connection, set Wired Enable to On.
a Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
b Press + or - to choose Network.
Press OK.
c Press + or - to choose Wired LAN.
Press OK.
d Press + or - to choose Wired Enable.
Press OK.
e Press + or - to choose On or Off.
Press OK.
WLAN Enable (For HL-3075CW wireless network only)
8
If you want to use the wireless network connection, set WLAN Enable to On.
a Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
b Press + or - to choose Network.
Press OK.
c Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose WLAN Enable.
Press OK.
e Press + or - to choose On.
Press OK.
WPS or AOSS (For HL-3075CW wireless network only)
8
If your wireless access point/router supports either Wi-Fi Protected Setup (PBC
1
) or AOSS™, you can
configure the machine easily without a computer. Your Brother machine has the WPS/AOSS menu on the
control panel. This feature automatically detects which mode your access point uses Wi-Fi Protected Setup
or AOSS™. By pushing a button on the wireless access point/router, you can setup the wireless network and
security settings. See the user’s guide for your wireless access point/router for instructions on how to access
one-push mode. (See Wireless configuration using WPS or AOSS from the control panel (For HL-
3075CW) in Chapter 6.)
1 Push Button Configuration