Brother CM100DM - Manual (Page 57)

55
4
f Select the size of the scanning area.
From the list, touch the key for the size of the original
to be scanned. For this example, select the A4 size.
a Size selection keys
b Touch to cancel the setting and return to the
previous screen.
c Touch to scroll through the list.
X After the selected key is highlighted, touch the
“OK” key to finish specifying settings.
g Touch (for “Scan Resolution”) to display
the scanning resolution settings screen.
h Select the scanning resolution.
From the list, touch the key for the scanning
resolution. For this example, select 150 dpi.
a Resolution selection keys
b Touch to cancel the setting and return to the
previous screen.
X After the selected key is highlighted, touch the
“OK” key to finish specifying settings.
i Check the settings, and then touch the “OK”
key.
X A message appears.
■ Scanning and Saving
a Attach the original that will be scanned to the
mat.
Note
• Place the original to be scanned so that it is in
the landscape orientation.
a 12" × 12" (305 mm × 305 mm)
b Letter (216 mm × 279 mm)
c A4 (210 mm × 297 mm)
d 8" × 8" (203 mm × 203 mm)
e 5" × 7" (127 mm × 178 mm)
f 4" × 6“ (102 mm × 152 mm)
g 3.5" × 5" (89 mm × 127 mm)
b Load the mat into the feed slot.
For details on loading the mat, see “Loading the Mat”
on page 20.
c Press the “Start/Stop” button to start scanning.
X The data is saved at the same time that the
original is being scanned.
X When scanning and saving is finished, the
completion message appears.
d Touch the “OK” key to exit “Scan to USB”
mode.
e Press in the operation panel to feed out
the mat.
f Unplug the USB flash drive from the USB port
on this machine.
g From a computer, check the saved image data.
b a
c
b a
a
b
c d e f g