Brother CM100DM - Manual (Page 30)

28
■ Selecting and Editing the First Pattern
Piece
a Select “Pattern” in the home screen.
b Select the category in the pattern category
selection screen.
a Touch to return to the previous screen.
b Pattern categories
Memo
• The pattern categories and built-in patterns that
appear in the operation screens differ
depending on the machine model. For details
on the built-in patterns, refer to the included
pattern list.
c Select the sub-category in the pattern sub-
category selection screen.
d Select the pattern to be cut out in the pattern
selection screen.
a Touch to scroll up.
b Touch to scroll down.
e Edit the size of the entire pattern using the
pattern sizing screen.
After editing is finished, touch the “OK” key.
• For details on the pattern sizing screen, see
“Pattern Sizing” on page 34.
f Select the piece to be edited first in the pattern
piece list screen, and then touch the “OK” key.
From the pattern piece list that appears in the screen,
touch a pattern piece to edit it individually.
Memo
• The pattern pieces displayed in the pattern
piece list screen are automatically arranged so
that the grain is vertical when fabric is used as
the material for cutting. Therefore, the angle at
which the pattern appears in the pattern piece
list may differ from the actual angle of the
pattern piece to be cut out.
a Appearance in pattern piece list
b Actual arrangement of the pattern piece to be
cut out
• Change the angle of pattern piece using the
rotating function according to your project. For
details, see “Editing the Pattern Piece” on
page 34.
b
a
b
a
b
a