Brother Pocket Jet6 PJ-622 - Manual (Page 41)

PJ-600 Series Utility
37
3
PJ-600 Series Utility Menu
3
1 Select All
Click [Select All] to select all of the check
boxes in PJ-600 Series Utility.
2 Clear All
Click [Clear All] to clear all of the check boxes
in PJ-600 Series Utility.
3 Current
Click [Current] to retrieve the current settings
from the printer selected in the [Printer]
pull-down menu.
4 Bluetooth Settings (PJ-662/663 only)
Click [Bluetooth Settings] to open the
Bluetooth settings dialog box, which allows you
to name the printer, change the printer’s
Bluetooth PIN code (passkey), etc.
„ PIN code
Allows you to select whether a Bluetooth
PIN code (passkey) is required, change the
printer's Bluetooth PIN code, and select
whether Bluetooth communication is
encrypted.
If [Enable] is selected in the [PIN code]
pull-down menu, the PIN code specified
here must also be stored on the computer
in order to communicate with the printer
when using Bluetooth. You can change the
PIN code if necessary.
If the [Encryption] checkbox is selected,
data sent using PJ-600 Series Utility
between the computer and printer will be
encrypted when using Bluetooth.
„ Device Name
Allows you to specify a name (up to 30
characters) for the printer. Useful when
there are multiple Bluetooth printers
present.
„ Visible to Other Devices
Allows you to specify whether the printer
can be “discovered” by other Bluetooth
devices.
„ Bluetooth Address
Displays the current Bluetooth address.
Note
The PIN code and the device name must use
alphanumeric characters (A-Z, a-z, 0-9) only.
The device name can contain a space
character; the PIN code cannot.
5 Maintenance
Click [Maintenance] to open the maintenance
dialog box.
1
2
5
6
3 4
7