Brother Pocket Jet6 PJ-622 - Manual (Page 10)

Chapter 1
6
Using the
Rechargeable Li-ion
Battery (Optional)
1
Installing the Rechargeable
Li-ion Battery
1
a
Open the battery cover by pressing the
cover latch.
1 Battery cover
2 Cover latch
b
Swing the cover open and remove it.
c
Move the slide switches on the
rechargeable Li-ion battery inward, and
then insert the battery into the battery
compartment.
3 Slide switches
Note
When installing the rechargeable Li-ion
battery, insert the battery removal ribbon
into the battery compartment, and then
install the battery. The battery removal
ribbon is not needed when removing the
rechargeable Li-ion battery.
d
Move the slide switches outward to lock
the battery in place.
Note
The voltage supplied by the rechargeable
Li-ion battery fluctuates. The printing
speed may also fluctuate depending on
the voltage.
Removing the Rechargeable Li-ion
Battery
1
Move the slide switches on the rechargeable
Li-ion battery inward, and then remove the
battery from the printer.
1 Slide switches
2
1
3
1