Brother Pocket Jet6 PJ-622 - Manual (Page 32)

Chapter 3
28
The main window (shown below) opens, and
the printer’s default settings are displayed.
Settings shown here vary by country and may
have been specially configured for some
customers.
How to Use PJ-600 Series
Utility
3
a
In the main window of the PJ-600 Series
Utility, select the check boxes of the
parameters with settings that can be
changed.
b
Select the desired settings from the
pull-down menus or enter the desired
values.
c
Click [Send Settings] to save the
settings in the printer.
Note
Some parameters can be adjusted using
both the printer driver's dialog box and
PJ-600 Series Utility. For the following
parameters, the setting specified in the
printer driver’s dialog box has priority.
[Paper Size]
[Density] ([Print Density])
[Form Feed Mode]
[Dash Line Print]
Settings that are specified using the
printer driver are used during printing and
are saved until the printer is turned off.
When the printer is turned on again, the
settings specified using PJ-600 Series
Utility are used as the default settings.