Brother Pocket Jet6 PJ-622 - Manual (Page 11)

Setting Up the Printer
7
1
Charging the Rechargeable
Li-ion Battery
1
The rechargeable Li-ion battery can be
charged while it is inserted in the printer and
also while it is removed from the printer.
Perform the following procedure to charge
the rechargeable Li-ion battery.
Note
• Charge the rechargeable Li-ion battery
immediately after purchase using the
following procedure.
• Up to 180 minutes is needed to fully
charge a rechargeable Li-ion battery.
About 300 pages can be printed when
using a new, fully-charged rechargeable
Li-ion battery.
Charging While Installed in the Printer
1
a
Make sure that the printer is turned off.
b
Make sure that the rechargeable Li-ion
battery is installed in the printer.
c
Use the AC adapter and AC power cord
to connect the rechargeable Li-ion
battery to an AC power outlet, or use the
DC cable to connect the battery to a DC
power outlet.
The battery indicator lights in orange.
When the rechargeable Li-ion battery is
fully charged, the battery indicator turns
off.
1 POWER indicator
2 Battery indicator
Charging While Removed From the
Printer
1
Use the AC adapter and AC power cord to
connect the rechargeable Li-ion battery to an
AC power outlet, or use the DC cable to
connect the battery to a DC power outlet.
The battery indicator lights in orange.
When the rechargeable Li-ion battery is fully
charged, the battery indicator turns off.
1 Battery indicator
Stopping Rechargeable Li-ion Battery
Charging
1
To stop rechargeable Li-ion battery charging,
disconnect the AC power cord or DC cable
from the battery’s AC/DC connector.
2
1
1