Asus P4T533 - Manual (Page 89)

ASUS P4T533 motherboard user guide 71
Parallel Port Mode [ECP+EPP]
This field allows you to set the operation mode of the parallel port.
[Normal] allows normal-speed operation but in one direction only; [EPP]
allows bidirectional parallel port operation; [ECP] allows the parallel port to
operate in bidirectional DMA mode; [ECP+EPP] allows normal speed
operation in a two-way mode. Configuration options: [Normal] [EPP] [ECP]
[ECP+EPP]
ECP DMA Select [3]
This field allows you to configure the parallel port DMA channel for the
selected ECP mode. This selection is available only if you select [ECP] or
[ECP+EPP] in Parallel Port Mode above. Configuration options: [1] [3]
Onboard AC97 Modem Controller [Enabled]
This parameter allows you to enable or disable the onboard Modem
controller. Keep the setting [Auto] if you wish to use the onboard LAN
feature. Set this field to [Disabled] if you installed a PCI LAN card. The
LAN card includes a controller chipset. Configuration options: [Disabled]
[Auto]
Onboard AC97 Audio Controller [Enabled]
This parameter allows you to enable or disable the onboard AC97 audio
controller. Configuration options: [Disabled] [Auto]
Speech POST Reporter [Enabled]
This field enables or disables the ASUS POST Reporter ™ feature. More
information is available in section 3.2, Vocal POST Messages. Configuration
options: [Enabled] [Disabled].