Asus P4T533 - Manual (Page 39)

ASUS P4T533 motherboard user guide 25
5. USB Device Wake-Up (2x3 pin USBPWR_12, 34)
The default setting, [1-2] (+5V) enables the USB wake-up feature. Reset
these jumpers to pins [2-3] (+5VSB) to disable the wake up feature.
The USB device wake-up feature requires a power supply that can
provide at least 1A on the +5VSB lead. If this requirement is not met,
the system does not power up. The total current consumed must NOT
exceed the power supply capability (+5VSB) whether under normal
condition or in sleep mode.
P4T533
®
P4T533 USB Setting
USB_EN
Enable Onboard
NEC USB
Disable
(Default)
1 2 2 3
P4T533
®
P4T533 USB Device Wake Up
USBPWR_12
USBPWR_34
+5VSB
2 3
+5V
1 2
+5V
1 2
+5VSB
2 3
(Default)
(Default)
4. USB Header (3 pin USB_EN)
The USB header (USB_EN) is enabled by the default setting, [1-2]. Select
[2-3] to disable the header.