Asus P4T533 - Manual (Page 125)

ASUS P4T533 motherboard user guide 105
FastBuild (tm) Utility 1.31 (c) 1996-2000 Promise Technology, Inc.
[ Source DiSk ]
[ Please Select A Source Disk ]
[ Keys Available ]
[ ] Up [ ] Down [ESC] Exit [Enter] Select [ ] Up [ ] Down [ESC] Exit [Enter] Select
Channel:ID Channel:ID
------ ------
Drive Model Drive Model
--------- ---------
Capacity (MB) Capacity (MB)
------- -------
[ Target Disk ]
Channel:ID Channel:ID
------ ------
Drive Model Drive Model
--------- ---------
Capacity (MB) Capacity (MB)
------- -------
Channel:ID Channel:ID
1:Sla ST3322IA 1:Sla ST3322IA
Drive Model Drive Model Capacity (MB) Capacity (MB)
1:Mas ST3322IA 1:Mas ST3322IA 3077
3077
Do you want the disk image to be
duplicated to another?(Yes/No)
Y -Create and Duplicate
N -Create Only
FastBuild (tm) Utility 1.31 (c) 1996-2000 Promise Technology, Inc.
[ Keys Available ]
[ Auto Setup Options Menu ]
Optimize Array for: Security
Typical Application to use: Not Available
[ ] Up [ ] Down [ , ,Space] Change Option [ESC] Exit [CTRL-Y] Save [ ] Up [ ] Down [ , ,Space] Change Option [ESC] Exit [CTRL-Y] Save
Mode ........................................ Mirror
Spare Drive.................................. 0
Drive(s) Used in Array....................... 2
Array Disk Capacity (size in MB)............. 14645
[ Array Setup Configuration ]
1. In the FastBuild™ Utility Main Menu, select Auto Setup [1].
2. Go to the field Optimize Array for: and select Security. The Mode field
displays Mirror.
3. After making the selection, use to save it. FastBuild™ offers a
choice between two options. Use for Create and Duplicate to mirror
a pre-existing hard disk formatted with data that you want to save on
both hard disks; (Go to step 4.) Use for Create Only if using two
new hard disks to configure a new RAID 1 mirrored array; (Go to step 6.)
4. If selecting , for Create and Duplicate, this screen will be displayed:
5.10.4 Creating a RAID 1 Array