Asus P4T533 - Manual (Page 24)

10 Chapter 2: Hardware information
2.3 Before you proceed
Take note of the following precautions before you install motherboard
components or change any motherboard settings.
1. Unplug the power cord from the wall socket before touching any
component.
2. Use a grounded wrist strap or touch a safely grounded object or to a
metal object, such as the power supply case, before handling
components to avoid damaging them due to static electricity.
3. Hold components by the edges and do not to touch the ICs on them.
4. Whenever you uninstall any component, place it on a grounded
antistatic pad or in the bag that came with the component.
5 Before you install or remove any component, ensure that the
ATX power supply is switched off or the power cord is
detached from the power supply. Failure to do so may cause
severe damage to the motherboard, peripherals, and/or
components.
19) SMARTCON p. 41 Smart Card Reader connector (14-1 pin) (optional)
20) FP_LO_SWL, FP_LO_SWR p. 41 Line-out Selector Jumpers (Two 2 pin)
21) AFPANEL p. 42 ASUS iPanel / Infrared Connector (24-1 pin)
22) LINE_IN p. 43 Front Panel Audio Line In Header (5 pin)
23) AAPANEL p. 43 Front Panel Audio Connector (10-1 pin)
24) SPDIF p. 44 Digital Audio Connector (4-1 pin) (optional)
25) GAME p. 44 Game Header (16-1 pin GAME)
26) TRPWR p. 45 Power Supply Thermal Connector (2 pin)
27) PLED p. 46 Keyboard Lock Switch Lead (2 pin)
28) KEYLOCK p. 46 Keyboard Lock Switch Lead (2 pin)
29) SPEAKER p. 46 System Warning Speaker Lead (4 pin)
30) MLED p. 46 System Message LED Lead (2 pin)
31) SMI p. 46 System Management Interrupt Lead (2 pin)
32) PWRSW p. 46 ATX Power Switch / Soft-Off Switch Lead (2 pin)
33) RESET p. 46 Reset Switch Lead (2-pin)