Asus P4T533 - Manual (Page 31)

ASUS P4T533 motherboard user guide 17
2.5.2 Installing Memory
The memory module (RIMM) will fit in only one orientation.
IMPORTANT: Do not touch the memory module’s connectors. Handle
the module only by the edges.
P4T533
®
P4T533 184-Pin RIMM Sockets
RIMM Sockets
RIMM with Heat Spreader
C-RIMM
2. With the ejectors in the open position (as shown), push down gently but
firmly on the memory module until it snaps into place. The guides on the
socket’s ejectors should go through the two mounting notches on the
module and the ejectors should close. If necessary, push the ejectors
inward to secure the module in place.
1. Make sure that the notch keys in the module are aligned with the small
ribs inside the RIMM sockets.
No hardware or BIOS setup is required after adding or removing memory.
○○○ ○○○