Aussie Bushman User Manual
Page 27
Step 22 - Attach LP Cylinder
•Swing the Cylinder Retainer Clip to outside of the Bottom Shelf. Place the LP Cylinder in circular
recessed area on Bottom Shelf. Position Cylinder Retainer Clip over round shoulder of the LP
Cylinder until it meets the cylinder carrying handle.
•Take the protective cap off the cylinder valve. Hold Regulator in a straight line with LP Cylinder
valve so the connection does not cross thread. Insert nipple of regulator into the LP cylinder nozzle
opening. Hand tighten coupling nut in clockwise direction. Do not use tools.
•Turn all control knobs and LP Cylinder valve to the “Off” position.
You are now ready to use your grill!
27
Hand tighten
coupling nut
in clockwise
direction
Cylinder
Retainer Clip
Caution: When swinging Cylinder
Retainer Clip into position, keep
fingers and hands on corners of
Clip to prevent Pinching.