Aussie Bushman User Manual
Page 10
STEP 1- Cylinder Support/ Retainer Clip Assembly
TOOLS:
10
•Using three 6M x 15 bolts and three 6M nuts, attach the Cylinder Support to the Bottom Shelf as
shown.
•Attach Cylinder Retainer Clip to Bottom Shelf: push ends of clip in and allow to spring outward
through holes in top surface of bottom shelf.
•The Cylinder Support will be on the left of the Bottom Shelf as you face the front of your grill.
(
ITEM 6) BOTTOM SHELF
(ITEM 5)
CLIP, CYLINDER
RETAINER
(ITEM 7)
CYLINDER SUPPORT
IMPORTANT: BEFORE ASSEMBLY OF YOUR LP GAS GRILL YOU MUST HAVE AN LP GAS
CYLINDER EQUIPPED WITH AN OPD (OVERFILL PREVENTION DEVICE) AND HAVE IT FILLED
AT AN AUTHORIZED LP GAS DEALER. THE CYLINDER WILL BE USED TO PERFORM LEAK
TESTING DURING ASSEMBLY.
(ITEM 8)
6M X 15 BOLT
3 pcs
(ITEM 9 )
6M NUT
3 pcs