Brother NC-2200W - Manual (Page 8)

English
7
To communicate with the un-configured
NC-2200w change your wireless computer
settings to:
Communication mode: Ad-hoc
(channel 11)
Network name : SETUP
(SSID/ESSID) (case sensitive)
Encryption: None
Please refer to your wireless card
manufacturer instructions for changing the
wireless settings, and then go to Step 3
Configuring the Print/Scan Server.
If you are using Windows ® XP or Mac OS ®
X 10.2.4 and you are using its built in
Wireless Ethernet capabilities, use the
following steps for each Operating
System.
1
Click Start and then Control Panel.
2
Click the Network Connections icon.
3
Select and right click Wireless Network
Connection. Click View Available
Wireless Networks.
4
You can see the Network name
(SSID/ESSID) of the NC-2200w in the
Available wireless networks box.
Select SETUP and check the Allow me
to connect... check box. Click the
Connect button.
For Windows ® 98/Me/2000,
Windows NT ® 4.0 Users
Go to
Step 3
on page
9
For Windows ® XP Users