Brother NC-2200W - Manual (Page 12)

English
11
2
Un-check the Automatically detect and
install my Plug and Play printer
selection and then click Next.
3
Temporarily select
LPT1:(Recommended Printer Port)
from the pull down window for the Printer
Port Selection and then click Next.
4
Click on Have Disk.
5
(For Brother Laser Printer Users)
Browse the CD-ROM and select the
Driver folder and click Open, then select
the Win2k_xp folder (or the folder for
your OS) and click Open and then select
the appropriate language and click
Open.
(For Brother MFC/DCP Users)
Browse the CD-ROM and select the
appropriate language folder and click
Open, then select the WXP folder (or the
folder for your OS) and click Open and
finally select the Addprt folder and click
Open.
6
Click Open and then click OK.
■
Your OS may not have this screen.
■
(For Windows
®
98/Me/Windows NT
®
4.0 Uses) If this screen is displayed,
select Local printer and then click
Next.
■
If your OS is Windows ® XP and the
Win2k_xp folder is not found in the
list, please select Win2k folder.
■
If you do not see the a folder for your
operating system in the Driver folder,
but instead see: inst, PCL, PS,
USBW98ME, etc. we recommend
that you select the PCL folder. You
will see the appropriate operating
system folder.