Takagi T-M32 - Manual (Page 3)

- 3 -
INTRODUCTION
1. A hot water tap is turned on.
2. Water enters the heater.
3. The water flow sensor detects the water flow.
4. The computer automatically ignites the burner.
5. Water circulates through the heat exchanger and then gets hot.
6. The computer will modulate the gas supply valve and water flow to produce the right
amount of hot water at the correct temperature.
7. When the tap is turned off, the unit shuts down.
*This diagram illustrates
Takagi’s tankless water
heater design concepts
only and is not accurate to
the T-M32’s physical
description.
• This manual provides information necessary for the installation, operation, and
maintenance of the Mobius T-M32 water heater.
• The model description is listed on the rating plate which is attached to the front cover of
the water heater.
• Please read all installation instructions completely before installing this product.
• If you have any problems or questions regarding this equipment, consult with Takagi or its
local representative.
• The T-M32 Water Heater is an on-demand, tankless water heater designed to efficiently
supply endless hot water for your needs.
• The principle behind the T-M32 Water Heater is simple: