Sterlco Micro Series Water Temperature Control Unit - Manual (Page 27)

MICRO Series Water Temperature Control Units Page 27
The OUT1 indicator is on when the fluid temperature is below the set point and
is being heated.
OUT2 Indicator
The OUT2 indicator is on when fluid temperature is above the set point and is
being cooled.
Display Indicators
LED Indicator
Under normal operation the LED indicator displays the temperature of the
outgoing fluid. To view the setpoint press the star (
*)
key
4-4 Using CAL Controls Controller Keys
Star (*) Key
ƒ Press and hold the Star (*) key to view the setpoing.
ƒ Press the Star (*) Key and the together to increase the setpoint.
ƒ Press the Star (*) Key and the
together to decrease the
setpoint.
UP Arrow Key
ƒ Press the
UP Arrow key to scroll through the functions, or
increment or advance the values or settings on the LED screens.
DOWN Arrow Key
ƒ Press the
DOWN Arrow key to scroll through the functions,
decrement or reduce the values or settings on the LED screens.
Important!
Do not change any of the control settings
without consulting the manufacturer’s Service Department.
The manufacturer’s warranty does not cover TCU failures
from tampering with controller settings!