ROTRONIC HC2 - Manual (Page 3)

E-M-HC2-accessories_24
Rotronic AG
Bassersdorf, Switzerland
Document code Unit
Accessories and Parts
for probes, indicators and transmitters Instruction Manual
Document Type
Page 3 of 23
Document title
© 2009-2010; Rotronic AG E-M-HC2-accessories_23
1 Configuration and communication software
The ROTRONIC HW4 software (version 2.1.0 or higher) allows configuring the AirChip 3000 probes and
instruments.
HW4 is compatible with Windows XP, Vista and NT4 with SP6a or higher. For more details see separate
instruction manual provided with the software.
Order Code
Description
HW4-E HW4 software, Standard Edition ( single user)
HW4-P HW4 Professional Edition, ERES regulations compliant (FDA / GAMP), multi user
2 Service cables for transmitters and indicators
Order Code Description
AC3006
Mini-USB service connector (UART) to a PC
USB port. Cable electronics convert UART
interface to USB interface. Approximate
length: 1.7 m
AC2001
Mini-USB service connector (UART) to 7-pin
probe connector of the HP23 hand-held
calibrator or other instrument with display and
keypad. Approximate length: 1.7 m
Notes:
o The active electronic circuit of cable AC3006 is powered directly from the USB port (PC or hub). Both
the AC3006 and AC2001 do not provide power to the transmitter or indicator and these must be
powered separately.
o Prior to using cable AC3006 the ROTRONIC USB driver must be installed on the PC (available from
the HW4 CD or from www.rotronic-humidity.com). For installation instructions see document
E-M-HW4v3-Main (§ 7.3).