4 rotronic device configuration certificate, Rotronic device configuration certificate, 4rotronic device configuration certificate – ROTRONIC Dockingstation with WEB-Server User Manual
Page 7: In-e-ds-u4web-v1_14

IN-E-DS-U4WEB-V1_14
Rotronic AG
Bassersdorf, Switzerland
Document code
Unit
Docking station DS-U4WEB with web
server version 1: instruction manual
Instruction Manual
Document Type
Page
7 of 15
Document title
© 2007; Rotronic AG
IN-E-DS-U4WEB-V1_14
4
ROTRONIC device configuration certificate
ROTRONIC docking stations with an Ethernet interface (both wired and wireless) are shipped
with a Device Configuration Certificate that provides information about the factory configuration
settings, in particular the TCP/IP settings. See example below:
Setting
Value
DHCP or Static Address
Static
IP Address
192.168.1.1
Subnet Mask
255.255.255.0
Default Gateway
192.168.1.0
TCP Port
2101
MAC Address
00:40:9D:28:2D:2A
Firmware Release (device)
1.4
Serial Port Configuration Profile
TCP Sockets
Basic Serial Settings
Baud Rate
57600
Data Bits
8
Parity
None
Stop Bits
1
Flow Control
None
Note: the Baud rate setting of the DS-U4WEB internal Ethernet module cannot be changed and
is always 57600 bps. Consequently, any HygroLog NT used with this docking station should also
be set to a Baud rate of 57600 bps to enable communication between the logger and docking
station.