Avocent ECMS2000U - Manual (Page 48)

Chapter 3: Operations 37
5. Choose Target Video. The Target Video Menu will display.
Figure 3.26: Transmitter Target Video Menu
6. To toggle between DVI or VGA, choose menu item 1. Target Video - DVI/VGA.
7. The updated setting will be displayed beside 1. Target Video - DVI/VGA.
8. To save your changes and exit the menu, type 0 (zero) and press Enter .
The unit resets after you press Enter .
Session Retry Settings
The Avocent Emerge ECMS2000U Extender is designed to automatically establish a connection
between the Receiver and the remote computer. By default, if the Receiver cannot immediately
establish a connection with the remote computer it will retry once per second until a connection is
successfully established. You can change the default session retry settings using the serial menu.
To access the Session Retry Menu:
1. Activate the serial menu as described in Accessing the serial menu on page 14.
2. Choose option 1 to access the Receiver menu. If the password option is enabled, you will be
prompted for a password. See Authentication on page 24.
3. Type the password and press Enter . The Receiver Main Menu will appear.
4. Choose Console Settings. The Console Settings Menu will appear.