Avocent ECMS2000U - Manual (Page 34)

Chapter 3: Operations 23
Detecting a Transmitter IP Address
In the event that you forget the IP address of a Transmitter, you can use the serial menu to detect the
IP address of a Transmitter that is connected to the Receiver.
To detect the IP address of a connected Transmitter:
1. Power down the down the remote computer to which the Transmitter is attached.
NOTE: If the Transmitter receives its power from an external power supply, disconnect the Transmitter from that
external power supply.
1. Choose option 1 to access the Receiver menu. If the password option is enabled, you will be
prompted for a password. See Authentication on page 24.
2. Type the password and press Enter . The Receiver Main Menu will appear.
Figure 3.12: Receiver Main Menu
3. Choose Network Configuration. The Network Configuration Menu will appear.
Figure 3.13: Network Configuration Menu