beautypg.com

Data logger manual – Dwyer DLI-R User Manual

Page 14

background image

Data Logger Manual

Page 13

5.4 Units

Pressing the F3 key while viewing the Main Screen will access the Units Selection
screen. Here the measurement units can be easily changed. In the Units Selection
screen the F1 function key corresponds to the external probe channel. Selecting
this channel by pressing its corresponding function key allows the user to
change the units by either pressing the function key repeatedly or using the
UP and DOWN keys to scroll through the list of available units. Selecting ok
(either by pressing the OK button or the F4 key) accepts and confi rms the
unit selection. Pressing the CANCEL key cancels the unit changing action and
reverts to the previously selected units. The DLI-R offers most commonly used
units.

5.5 Setup Menu

Pressing the F4 key while in the Main Screen will display the Device
Confi guration screen. From this menu, changes can be made to most of the
DLI-R’s display confi guration including the screen contrast, size of the channel
view in the main screen, as well as display of the channels. Power status can
also be viewed including battery power remaining and the presence of external
power, and options regarding the LCD display and the backlight can be
modifi ed. The setup menu is also the place to fi nd basic information regarding
device identifi cation, calibration parameters, and fi rmware details.

5.5.i Display
From the Display section, the number and identity of channels shown on the
main screen can be changed and set, the LCD screen’s contrast values can be
changed and set, and the size the channel information appears on the main
screen can be changed and set. Pressing F1 while in the Setup Menu brings
up the Display section.

5.5.i.a Adjust Visibility

The

fi rst screen that appears in the Display section is the Adjust Visibility

screen. Here the F1 key corresponds to the external probe channel.

Pressing F1 results in highlighting its corresponding channel function

tab. While the channel is highlighted the corresponding display function

can be toggled between “Hide” and “Show”, with “Hide” indicating that

the channel will not be displayed on the main screen and “Show”

indicating that it will be shown. Channels can be toggled by either

repeatedly pressing the channel’s corresponding function key or by using

the UP and DOWN keys.