Dwyer DLI-R - Manual (Page 10)

Data Logger Manual
Page 9
Section 4: Front Panel Overview Section 4: Front Panel Overview
4.1 Changing the display units
The DLI-R comes with factory default display units of °C for the external
probe channel. These units can be easily changed by pressing the F3 button
in the main screen and then selecting F1 for external probe. After selecting
F1, the available units can be scrolled through by either pressing the F1 key
repeatedly or using the UP and DOWN keys.
Button pressing chain:
Main Screen -> F3 -> F1 ->F1 key repeatedly or UP and DOWN
4.2 Changing the number, type, and size of channels viewed
By default the DLI-R displays recently measured values from the external
probe channel on its Main Screen with the readings displayed in a large size
font. These recently measured values can, however, be hidden or viewed on
a smaller or larger scale.
To change the view of recently measured values:
From the Main Screen, press the F4 key to enter the Setup Menu and from
this menu press the F1 key to enter the Display screen. On this screen, function
key 1 (F1) corresponds to the external probe. Pressing this function key will
cause the channel to scroll between “show” or “hide”. If “show” is selected
recently recorded values from the external probe will appear on the main
screen and if “hide” is displayed they will not.
Button pressing chain:
Main Screen -> F4 -> F1 -> F1
To change the size of displayed channels:
From the Main Screen, press the F4 key to enter the Setup Menu and from
this menu press the F1 key to enter the Display screen, then F4 to scroll to
the next screen. Here the F2 key will change the size of the channels viewed.
By pressing F2 repeatedly the size parameter will scroll between 3 sizes: small,
medium, and large:
Button pressing chain:
Main Screen -> F4 -> F1 -> F4 -> F2 repeatedly to scroll