Dwyer 4C User Manual
Page 12
Page 12
Figure A: Output behavior for Heating/Cooling On/Off Applications
Heating Control Cycle Setting. Defines the duration for one
output period or cycle for output 1. Only available when
control mode is set to PID and Output 1 is set for heating.
Cooling Control Cycle Setting. Defines the duration for one
output period or cycle for output 1. Only available when
control mode is set to PID and Output 1 is set for cooling.
Process Temperature Offset. This feature allows the
input value to be changed to agree with an external
reference or to compensate for sensor error.
Analog Output High Limit: Sets the actual upper limit of the
analog output when the control’s output is operating at
100%. Only available for analog output models.
Analog Output Low Limit. Sets the actual lower limit of the
analog output when the control’s output is operating at 0%.
Only available for analog output models.
HtPd
CLPd
tPoF
Crh
CrLo