Dwyer GFM - Manual (Page 32)

28
APPENDIX 4
NOTE: Follow Return Procedures In Section 1.3.
WARRANTY
Dwyer Mass Flow Systems are warranted against parts and
workmanship for a period of one year from the date of purchase.
Calibrations are warranted for up to six months after date of
purchase, provided calibration seals have not been tampered with. It
is assumed that equipment selected by the customer is constructed
of materials compatible with gases used. Proper selection is the
responsibility of the customer. It is understood that gases under
pressure present inherent hazards to the user and to equipment, and
it is deemed the responsibility of the customer that only operators
with basic knowledge of the equipment and its limitations are
permitted to control and operate the equipment covered by this
warranty. Anything to the contrary will automatically void the liability
of Dwyer and the provisions of this warranty. Defective products will
be repaired or replaced solely at the discretion of Dwyer at no
charge. Shipping charges are borne by the customer.This warranty is
void if the equipment is damaged by accident or misuse, or has been
repaired or modified by anyone other than Dwyer or factory
authorized service facility. This warranty defines the obligation of
Dwyer and no other warranties expressed or implied are recognized.
TRADEMARKS
Buna ® -is a registered trademark of DuPont Dow Elastometers.
Dwyer ® -is a registered trademark of Dwyer Instruments.
Kalrez ® -is a registered trademark of DuPont Dow Elastomers.
Neoprene ® -is a registered trademark of DuPont.
Viton ® -is a registered trademark of Dupont Dow Elastomers L.L.C.