Crystal WT Series Panel Mount Digital Pressure Gauge - Manual (Page 19)

Support  17
XP2i Operation Manual
—
SOFTWARE
LabVIEW™ Drivers and Programming Instructions
Control and communicate with XP2is using National Instrument’s LabVIEW , or our Programming Instructions . Integrate XP2is into your test environment!
Confi gXP Confi guration Software
Use Confi gXP to disable unwanted pressure units, set default pressure units, change water density, adjust calibration, and more via the RS-232 interface.
—
REPLACEMENT PARTS
The only user-replaceable parts are the batteries.
—
ACCESSORIES
P/N 2984 AC adapter kit
Permits operation of an XP2i from an AC supply of 90 - 264 VAC and 47 - 63 Hz. Includes in ter change able in ter na tion al plugs (for USA, Europe, U.K., and Australia).
Adapter will not charge batteries, but in the event of AC power loss, XP2is will automatically revert to battery operation.
P/N 3313 USB-RS232 Adapter
USB B receptacle to RS232 DB9M.
P/N 2400 RS232 Cable
DB-9 male to DB-9 female straight pass-through cable.