Crystal WT Series Panel Mount Digital Pressure Gauge - Manual (Page 10)

Functions  8
XP2i Operation Manual
Low Battery Indication
The Battery icon ( ) uses three bars to display the battery level. When the icon displays all three bars, the batteries are full. The WT Series will continue to
op er ate ac cu rate ly while the icon is visible. When the batteries are ex haust ed, the letters batt will appear across the display. After batt appears, no pressure
mea sure ments will be possible un til the bat ter ies are replaced.
Battery Replacement
The WTSeries gauge uses 3 AAA alkaline batteries. The batteries are located above the gauge behind a metal panel. With a small fl at blade screwdriver, un-
screw the two panel screws to gain access to the battery compartment. Remove the battery holder and slide the cover off . After replacing the batteries, the
gauge will start operating immediately (without having to press the button). This indicates that a complete reset has occurred, and is normal.
!
CAUTION: Do not mix battery types or manufacturers.