Crystal nVision Reference Recorder User Manual
Star t, 1b 1a, Crystal control software installation
nVision Quick Start Guide
Crystal Control Software Installation
1
nVision Introduction
Thank you for choosing the nVision Reference Pressure Recorder from Crystal Engineering
Corporation. Your nVision is a combination of leading edge technology and rugged industrial
design. nVision, coupled with CrystalControl Software, allows you to make nVision exactly what
you need it to be.
CrystalControl Configuration Software
CrystalControl enables you to custom configure your nVision to tailor it suit your needs. With only
a mini USB B cable and a computer running Microsoft Windows* the CrystalControl Configuration
Software allows you to customize your nVision to suit your specific needs and applications.
Installation
CrystalControl is distributed as a self-extracting Setup application. Insert the enclosed CD and
launch CrystalControlSetup.exe. Follow the on-screen prompts for installation.
Software is also available from the Crystal Engineering website: www.crystalengineering.net/downloads.
We hope your nVision meets your expectations, and we’re interested in any comments
or suggestions you may have. You can send us a note at [email protected].
Many features in this and our other products are a direct result of your comments!
Microsoft Windows XP [SP3], Windows Vista [SP2] or Windows 7 Enterprise. Microsoft, Windows, XP, Vista or 7 is either a registered trademark or
trademark of Microsoft Corporation in the United States and/or other countries.
star
t
CrystalControl Configuration Screen
Connect or Disconnect
your nVision
Export and Save
in .xls format
Download only
checked runs
Reset graphing to
default zoom view
Hover cursor over graph to see date &
time summary (Show Point Values)
> Left-click & drag to zoom
> Right-click for additional options:
- Copy
- Save Image As
- Show Point Values
- Un-zoom
- Undo all Zoom/Pan
- Set Scale to Default
Customize Settings
with the "Config" tab
Commit Changes with
"Update Gauge"
View stored recorded
data in "DataViewer"
Select data run
for graphing
32 Character
Message Store
Chassis or Module
Configuration Settings
C R Y S T A L
engineering corporation
Copyright © 2010 Crystal Engineering Corporation
708 Fiero Lane, Suite 9, San Luis Obispo, California 93401-8701
No part of this document may be reproduced or modified in any form or by any means, electronic or
mechanical, without express written permission from Crystal Engineering Corporation.
Visit us on the web at
www.crystalengineering.net
P/N: 4117—Rev C
CrystalControl DataViewer Screen
1b
1a
Enable only the units
you need