Caleffi 130 - Manual (Page 8)

WARNINGS
The following instructions must be read and understood before installing the meter.
The safety symbol is used in this manual to draw attention to the respective safety
instructions. The meaning of this symbol is as follows:
CAUTION! YOUR SAFETY IS INVOLVED! FAILURE TO FOLLOW THESE INSTRUCTIONS MAY
RESULT IN INJURY.
- The device is intended for use only by expert personnel and in accordance with the precautions laid down in this
document and in line with established good practice. The device is not suitable for use by children or untrained
personnel.
- Do not switch the device on in places where there is a risk of fire or explosion.
- Do not switch the device on in airplanes or areas where there is a danger of electromagnetic interference.
- Do not connect the device straight to an electric supply network: use the transformer provided to charge the battery
- Do not connect the device to surfaces with high or dangerous voltages.
- Do not charge the device for more than 14 hours.
- Do not charge the device on easily flammable surfaces.
- Do not wet or immerse the device in water or other liquids.
- The sensor is not suitable for use with substances which could be hazardous to humans, such as acids, highly
basic liquids, and toxic, flammable or explosive liquids.
- Only use Caleffi-approved sensors.
- Do not open the flow meter or sensor: if tampered with, the warranty automatically ceases to have effect and the
device may no longer function properly. Furthermore, Caleffi shall not be liable for any malfunction or damage
resulting, either directly or indirectly, from use of the device.
- Caleffi shall not be liable for any damage caused to people or things, either directly or indirectly, as a result of
incorrect, unintended or improper use of the device.
- At the end of its life cycle, the device must be disposed of in accordance with applicable legislation regarding
the disposal of electronic waste and must not be treated as simple urban waste. The device has non-
biodegradable parts and substances which could pollute the surrounding environment if not disposed of
properly. The device must be disposed of in approved waste collection centers able to dispose of products
containing electronic components.
2
Product range
Code 130010 Electronic flow rate meter for connection to Vortex effect sensor
Package contents
The package contains:
Electronic flow rate meter for connection to
Vortex effect sensor
• Device case.
• Electric supply unit.
• Control lever.
• Vortex-effect measuring sensor.
• Connection cable.
• Sensor fixing ring.
• Lock