Badger Meter M-Series Field Verification Device - Manual (Page 7)

Page 7 8-11
User Guide
Cable Connections
Cable Harness
The cable harnesses are tagged with either M2000 or M5000 on the outer harness wire cover so the user can differentiate
between the two.
Connect the 25-pin connector of the corresponding cable harness to the top of the Verification Device and secure it with the
two screws on the left and right.
Figure 2: 25-Pin Connection
Power Connector
The Verification Device is a bettery powered unit. Before using the Verification Device, make sure it is fully charged by
connecting it to either the AC or DC power adapter.
AC Power Adapter Car Charger (DC Power) USB to PC (DC Power)
Figure 3: Power and PC Connections
USB Connector
The USB connector is used for either the DC power adapter or for downloading the test information to a PC.