Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 13)

Trimble
®
Ranger™ Serial Repeater Programmer
Installation and Operation Manual
June 2009
SN Details
This screen will be displayed when you highlight a serial number and touch Show Details [S] on
the Program Repeater screen or press “S” on the keyboard.
Displays
Serial Number—Identifies the transmitter being repeated;
Meter Type—One of the following will appear:
RTR=Water meter using an RTR ® ;
ADE=Water meter using an ADE ® ;
GAS=Gas meter;
Unknown=Probably indicates a malfunctioning meter or a bad transmitter.
Reading—Last reading received from the transmitter;
Status—Tamper or leak; and
Misses—Number of times the repeater missed a meter reading from this transmitter. (Note: the
repeater listens for transmissions once per hour.)
Done [X]—Touch the button or press “X” on the keyboard to return to the Program Repeater
screen.
Diagnostic Tools
Touching Tools [T] on the Program Repeater screen or pressing “T” on the keyboard will take
you to the Diagnostic Tools screen.
The Diagnostic Tools screen will help you verify that the repeater is mounted in a place that
assures it will hear the transmissions it needs to re-transmit and be heard by a laptop on the
street.
12