Installation data, Unit lifting, Ultima ™ remote air cooled chillers – Airedale Ultima Remote Air Cooled 75kW - 450kW User Manual
Page 28
ULTIMA
™ REMOTE AIR COOLED
Chillers
28
Chillers
Technical Manual : Part No 6259485 V1.6.0_07_2014
Installation Data
UNIT LIFTING
Employ lifting specialists.
Local codes and regulations relating to the lifting of this type of equipment should
be observed.
Use the lifting eye bolts provided.
Use the appropriate spreader bars/lifting slings with the holes/lugs provided.
Attach lifting chains to the 4 lifting eye bolts, each chain and eye bolt must be
capable of lifting the whole chiller.
Lift the unit slowly and evenly.
If the unit is dropped, it should immediately be checked for damage and reported
to Airedale Service.
CAUTION
Only use lifting points provided.
The unit should be lifted from the base and where possible, with all packing and
protection in position. If any other type of slinging is used, due care should be taken to
ensure that the slings do not crush the casework or coil.
N
P
R
P1
P2
P3
P4
C of G2
C of
G
1
T
S
LIFTING DIMENSIONS
N
P
R
S
T
URAC 75 - 125
mm
370
1060
370
2100
850
URAC 150 - 250
mm
370
1260
370
2100
850
URAC 240 - 450
mm
885
1900
415
2100
990