West Control Solutions TB 45 Temperature Limiter - Manual (Page 33)

7.2 Configuration
Dependent on instrument version and configuration settings, display of values which are not required is suppressed.
µ The entries marked with this symbol are selectable only, if the instrument option is fitted.
Inputs InP.1
Name Value range Description
S.tYP Sensor type
0 Thermocouple type L (-100...900°C), Fe-CuNi DIN
1 Thermocouple type J (-100...1200°C), Fe-CuNi
2 Thermocouple type K (-100...1350°C), NiCr-Ni
3 Thermocouple type N (-100...1300°C), Nicrosil-Nisil
4 Thermocouple type S (0...1760°C), PtRh-Pt10%
5 Thermocouple type R (0...1760°C), PtRh-Pt13%
6 Thermocouple type T (-200...400°C), Cu-CuNi
7 Thermocouple type C (0...2315°C), W5%Re-W26%Re
8 Thermocouple type D (0...2315°C), W3%Re-W25%Re
9 Thermocouple type E (-100...1000°C), NiCr-CuNi
10 Thermocouple type B (0/100...1820°C), PtRh-Pt6%
18 Special thermocouple (linearization necessary)
20 Pt100 (-200.0 ... 100,0 °C) (150°C with reduced lead resistance)
21 Pt100 (-200.0 ... 850,0 °C)
22 Pt1000 (-200.0...850.0 °C)
23 Special 0...4500 Ohm (preset KTY11-6)
24 Special 0...450 Ohm
25 Special 0...1600 Ohm
26 Special 0...160 Ohm
30 0...20mA / 4...20 mA
40 0...10V / 2...10 V (Inp.1 only)
41 Special (-2,5...115 mV)
42 Special (-25...1150 mV)
43 Special (-25...90 mV)
44 Special (-500...500 mV)
45 Special (-5...5 V) (Inp.1 only)
46 Special (-10...10 V) (Inp.1 only)
47 Special (-200..200 mV)
50 Potentiometer 0...160 Ohm
51 Potentiometer 0...450 Ohm
52 Potentiometer 0...1600 Ohm
53 Potentiometer 0...4500 Ohm
S.Lin Linearization only adjustable with S.tYP:18, 23 ... 47
0 none
1 Special linearization. Producing a linearization table is possible via BlueControl (Engi-
neering-Tool). Preset is the characteristic for KTY 11-6 temperature sensors.
Configuration level
TB 45 Configuration 33