Thermo Fisher Scientific CyberScan pH 1000/pH 2500 - Manual (Page 24)

Instruction Manual pH 1000/ 2500
19
10 PROGRAM 2: MEMORY RESET AND AUTO-
OFF FUNCTION
This program allows you to clear all the memory stored and to
activate the Auto-Off function.
Program 2.0: Memory Reset
Selecting ON clears all data in memory including pH calibration data and
also Relative mV calibration data. The meter automatically switches off
and the clock appears. To proceed, switch the meter on again. If reset is
required, press
S or T to select the ON option and confirm by pressing
YES.
Program 2.1: Auto Off
This function is present to conserve energy by shutting off the meter after
30 minutes from the last key is pressed. Factory default sets this option to
ON. Press
S or T key to select option and confirm by pressing YES.
11 PROGRAM 3: SET CURRENT TIME AND DATE
This program is used to set the current date and time of the meter.
The values will be stored and displayed once it is entered into
memory, unless the meter is set to default settings.
Program 3.0: Display and set time
Use numeric keys to set time. Press YES to confirm.
Program 3.1: Display and set month
Use numeric keys to set time. Press YES to confirm.
Program 3.2: Display and set date
Use numeric keys to set time. Press YES to confirm.
Program 3.3: Display and set year
Use numeric keys to set time. Press YES to confirm.