Thermo Fisher Scientific CyberScan pH 1000/pH 2500 - Manual (Page 10)

Instruction Manual pH 1000/ 2500
5
7 / CAL EDIT / BEEP
Primary Function Press to edit pH buffer value while you are in pH calibration mode.
Secondary Function Turns on or off ‘beep’ sound whenever a key-press is depressed.
Numeric Value 7
8 / ALARM / READY
Primary Function Enter the high and/or low alarm values.
Secondary Function Turns on or off the READY function.
Numeric Value 8
9 / ACTIVATE / SET TIMER
Primary Function Press to start timer countdown.
Secondary Function Sets the time interval.
Numeric Value 9
. / MI / OPT
Primary Function Stores the displayed value into memory.
Secondary Function Activate different Memory Input Options, these include:
Data Log on Ready
Data Log on Time Interval
Set Time Interval for Data Log
Numeric Value . (decimal point)
0 / MR / OPT
Primary Function Recalls stored values from the memory in the Last-In-First-Out (LIFO) sequence.
Secondary Function Activate different Memory Recall options. There are two options:
Print all memory data
Clear memory
Numeric Value 0
+/- / PRINT / OPT
Primary Function Output the displayed data through the serial/RS232C port. Can be activated in the
measurement, HOLD functions and memory recall functions.
Secondary Function Sets the different print options. There are three options:
Print on ready
Print on time interval
Set print time interval
Numeric Value +/-