Thermo Fisher Scientific CyberScan pH 300/310 - Manual (Page 3)

TABLE OF CONTENTS
1 INTRODUCTION 1
2 DISPLAY AND KEYPAD FUNCTIONS 2
2.1 Display 2
2.2 Keypad 3
2.3 Inserting the Batteries 4
2.4 Connecting the Electrode and Temperature Probe 5
2.5 Attaching the Electrode Holder to the Meter 7
2.6 Inserting the Electrode into the Electrode Holder 7
3 CALIBRATION 8
3.1 Important Information on Meter Calibration 8
3.2 Preparing the Meter for Calibration 8
3.3 pH Calibration 10
3.4 Relative mV Calibration 12
3.5 Temperature Calibration 13
4 MEASUREMENT 14
4.1 Automatic Temperature Compensation 14
4.2 Manual Temperature Compensation 15
4.3 Taking Measurements 16
5 HOLD FUNCTION 17
6 MEMORY FUNCTION 18
6.1 Memory Input 18
6.2 Memory Recall 19
7 ADVANCED SETUP FUNCTIONS 21
7.1 Advanced SET-UP Mode Overview 23
7.2 P 1.0: Memory Clear (CLr) 25
7.3 P2.0: Viewing previous calibration data 26
7.4 P3.0: Viewing electrode data 27
7.5 P4.0: Unit configuration 29
7.6 P5.0: Resetting to factory default settings 34
7.7 P5.0: Setting the real-time clock 35
7.8 P6.0: Resetting to factory default settings 37
8 PROBE CARE AND MAINTENANCE 38
9 TROUBLE SHOOTING GUIDE 40
10 ERROR MESSAGES 41
11 SPECIFICATIONS 42
12 ACCESSORIES 43
13 ADDENDUM 1: METER FACTORY DEFAULT SETTINGS 46
14 WARRANTY 47
15 RETURN OF ITEMS 48