Thermo Fisher Scientific CyberScan pH 300/310 - Manual (Page 27)

24
pH 310 meter setup mode
P1.0: Memory clear
P1.0 Clear all stored readings
P2.0: Viewing previous calibration data (USA, NIST
or DIN standards)
P2.1 First calibration point (plus time and date)
P2.2 Second calibration point (plus time and date)
P2.3 Third calibration point (plus time and date)
P2.4 Fourth calibration point (plus time and date)
P2.5 Fifth calibration point (plus time and date)
P2.6 Sixth calibration point (plus time and date)
(only for DIN buffer set)
P3.0: Viewing electrode data
In pH measurement mode:
P3.1 pH electrode offset
P3.2 pH electrode slope
In mV (or relative mV) measurement mode:
P3.1 Relative mV offset
P4.0: Unit configuration
P4.1 READY indicator on or off
P4.2 Number of calibration points: 2, 3, 4 or 5 (or
6 for DIN buffer set only)
P4.3 Calibration buffer selection sets
P4.4 Selecting °C or °F
P5.0: Setting Clock
• Setting year
• Setting date (month/day)
• Setting time (hour/minute/second)
P6.0: Reset to factory default
P6.0 Reset to factory default settings