Appendix b: long range uv/ir fire simulator – Spectrex 20/20MU - Mini Flame Detector User Manual
Page 49
Spectrex Inc. - SharpEye
TM
ML & MU Flame Detector Manual – TM 767100, Rev. A, April 2005
41
Appendix B: Long Range UV/IR Fire Simulator
Figure 16: Fire Simulator
Product Description
The SharpEye UV/IR Long-Range Fire simulator 20/20-311 is designed
specifically for use with the UV/IR or UV flame detectors. The Fire Simulator emits
UV/IR radiation in a unique sequential pattern corresponding and recognizable by
the detector as fire. This allows the detectors to be tested under real fire conditions
without the associated risks of an open flame. There is a specially designed beam
collimator (model number 20/20-190) used for extended range
Unpacking
In addition to the delivery form, there should be the following contents:
• Fire Simulator with built in batteries
• Battery charger
• Optional Beam Collimator
• Storage Case
Operating Instructions
W
W
a
a
r
r
n
n
i
i
n
n
g
g: Do not open the Fire Simulator to charge the batteries or for any other
reason in a hazardous area.
C
C
a
a
u
u
t
t
i
i
o
o
n
n:
The following test will simulate a real fire condition and may activate the extinguishing
system or other alarms. If this is not desired, disconnect them before the test and
reconnect after the simulation.