Warranty dimensions and specifications – SHIMPO DRI-series User Manual

Page 20

LIMITED EXPRESS WARRANTY: Shimpo Instruments warrants, to the original purchaser of new products only, that this product shall be free from defects in
workmanship and materials under normal use and proper maintenance for one year from the date of original purchase. This warranty shall not be effective if the product
has been subject to overload, misuse, negligence, or accident, or if the product has been repaired or altered outside of Shimpo Instruments’s authorized control in any
respect which in Shimpo Instruments’s judgment, adversely affects its condition or operation.

DISCLAIMER OF ALL OTHER WARRANTIES: The foregoing warranty constitutes the SOLE AND EXCLUSIVE WARRANTY, and Shimpo Instruments hereby
disclaims all other warranties, expressed, statutory or implied, applicable to the product, including, but not limited to all implied warranties of merchantability and fitness.

LIMITATION OF REMEDY: Under this warranty, Shimpo Instruments’ SOLE OBLIGATION SHALL BE TO REPAIR OR REPLACE the defective product or part, at
Shimpo Instruments’ option. Shimpo Instruments reserves the right to satisfy warranty obligation in full by reimbursing Buyer for all payments made to Shimpo Instruments,
whereupon, title shall pass to Shimpo Instruments upon acceptance of return goods. To obtain warranty service, Purchaser must obtain Shimpo Instruments’s authorization
before returning the product, properly repackaged, freight pre-paid to Shimpo Instruments.

INDEMNIFICATION & LIMITATION OF DAMAGES: Buyer agrees to indemnify and hold Shimpo Instruments harmless from and against all claims and damages
imposed upon or incurred arising, directly or indirectly, from Buyer’s failure to perform or satisfy any of the terms described herein. In no event shall Shimpo Instruments
be liable for injuries of any nature involving the product, including incidental or consequential damages to person or property, any economic loss or loss of use.

MERGER CLAUSE: Any statements made by the Seller ’s representative do not constitute warranties except to the extent that they also appear in writing. This writing
constitutes the entire and final expression of the parties’ agreement.

Warranty

Dimensions and Specifications

S P E C I F I C A T I O N S

MODEL

DRI

Sensor

Interchangeable w/Shimpo force & torque sensors

Display

5 digit 0.47"(12 mm) high with various indicators including low batter y indication and minus sign

Measuring Mode

Average, peak compression(CW), peak tension(CCW) (selectable)

Display Update

125 msec, 250 msec, 500 msec, 1 sec, 2 sec (selectable)

Sampling R

Sampling Rate

ate

1000 sample/sec

Outputs

1.RS232C 2.Digimatic:(works with Mitutoyo’s printer model DP-1HS) 3.Analog:(±1 VDC 1000 times/sec update)

Comparator Output (Set P

Comparator Output (Set Point)

oint)

oint) Three open collecter NPN transistors for HI, GO and LO (28 VDC, 7 mA max.)

Overload Output

Two open collector NPN transistors one for tension and one for compression (28 VDC, 5 mA max.)

TTTTTare & Hold Control

are & Hold Control

Relay contact (tare or hold selectable)

Memor

Memoryyyyy

Hold 100 samples plus statistics

(MAX, MIN, AVG, and Standard Deviation)

PPPPPower

ower

4-AA alkaline batteries. Last approx. 20 hrs. in continuous operation or AC adapter for continuous use (6 or 9 VDC,200 mA)

Auto P

Auto Power Shut-Off

ower Shut-Off

Selectable (3 minutes if there is no activity)

Operating T

Operating Temperature R

emperature R

emperature Range

ange

ange 32 to 113°F (0 to 45°C)

Dimensions

3" W × 1.77" H × 9.42" L (76 mm × 45 mm × 239.2 mm)

Standard Accessories

AC adapter, (4) AA batteries, DRI output connector, Overload protection cable (DFS-CTRLCABLE), Plastic carrying case