Pyromation Series 610 1_16 DIN - Manual (Page 89)

1 /
4
-DIN, 1 /
8
-DIN & 1 /
16
- DIN Controllers & Indicators - Product Manual
Changing Parameter Values
Press to navigate to the required parameter, then press or to set the
value as required.
When a value is changed, the display will flash to indicate that confirmation of the change is
required. The value will revert back if not confirmed within 10 seconds.
Press to accept the change.
Or
Press to reject the change and to move onto the next parameter.
Hold down and press to return to Select Mode.
Note:
If there is no key activity for 2 minutes, the instrument returns to the operator mode.
Description Default
Table 21. P6700, P8700 & P4700 Configuration Mode Parameters
Parameter Lower
Display
Upper
Display
Value
When
Visible
3
B type: 100 to 1824 ºC
"
B type: 211 to 3315 ºF
33
C type: 0 to 2320 ºC
3"
C type: 32 to 4208 ºF
J type: -328 to 2192 ºF
6
.
3
J type: -128.8 to 537.7 ºC
with decimal point
6
.
"
J type: -199.9 to 999.9 ºF
with decimal point
K 3 K type: -240 to 1373 ºC
K " K type: -400 to 2503 ºF
k
.
3
K type: -128.8 to 537.7 ºC
with decimal point
K type: -199.9 to 999.9 ºF
with decimal point
'3
L type: 0 to 762 ºC
'"
L type: 32 to 1403 ºF
'
.
3
L type: 0.0 to 537.7 ºC
with decimal point
Input type and
Range %C)/
'
.
"
L type: 32.0 to 999.9 ºF
with decimal point
63
for Europe
6"
for USA
Always
&3
J type: -200 to 1200 ºC
&"
K
.
"
Page 84
P6700, P8700& P4700 Model Group 59305, Issue 6 – March 2006