Aastra Telecom CT9143i - Manual (Page 55)

New Features in Release 2.3
RN-001029-02, Release 2.3, Rev 00 51
SIP IP Phone Models 9143i, 9480i, 9480i CT and 5i Series Phones Release Note 2.3
Configuring Preferred Line Focus via the Aastra Web UI
Use the following parameters to configure preferred line focus using the Aastra Web UI.
Aastra Web UI
1 Click on Basic Settings->Preferences->General.
2 In the “Preferred Line” field, select a preferred line to switch focus to after incoming or outgoing calls end on the
phone. Valid values are:
• None (disables the preferred line focus feature)
• 1 to 9
Default is 1.
For example, if you set the preferred line to “1”, when a call (incoming or outgoing) ends on the phone (on any line),
the phone switches focus back to Line 1.
3 In the “Preferred Line Timeout” field, enter the amount of time, in seconds, that the phone switches back to the
preferred line after a call (incoming or outgoing) ends on the phone, or after a duration of inactivity on an active
line. Default is 0. Valid values are:
• 0 to 999
4 Click to save your changes.
Preferred Line
Preferred Line
Timeout