KROHNE IFC 070 Converter EN - Manual (Page 26)

7
SERVICE
26
IFC 070
www.krohne.com 11/2009 - 7311242200 - MA IFC 070 R02
• Lead the cable of the new external battery through the gland opening and mount the attached
cable gland loosely.
• Pull the cable to the top of the electronics.
• Fasten the battery connector to the internal connector in the IFC 070 converter.
• Check that the display lights up.
• Refit the metal strip at the bottom of the housing.
• Tighten the cable gland.
• Put the cover back.
• Tighten the 4 bolts.
• Enter the programming mode, hold the V and Z key for 5 seconds.
i The display flashes.
• Press the Z key to enter the menu.
• Scroll through the available positions with the V key to position 74 and check the battery
capacity (important for battery life indication):
- internal single pack battery: 19 Ah
- internal dual pack battery: 38 Ah
- External battery pack: 76 Ah
• Go to position 75 and enter "1" (reset battery counter).
i Battery capacity symbol at the display should be "full".
• Hold the V key for 3 seconds to confirm the new value and go back to the measuring mode.
• Put the blue protection cap back.
7.2 Spare parts availability
The manufacturer adheres to the basic principle that functionally adequate spare parts for each
device or each important accessory part will be kept available for a period of 3 years after
delivery of the last production run for the device.
This regulation only applies to spare parts which are under normal operating conditions subjects
to wear and tear.
7.3 Availability of services
The manufacturer offers a range of services to support the customer after expiration of the
warranty. These include repair, technical support and training.
7.4 Returning the device to the manufacturer
7.4.1 General information
This device has been carefully manufactured and tested. If installed and operated in accordance
with these operating instructions, it will rarely present any problems.
WARNING!
Make sure that the battery cable is not jammed by the cover.
INFORMATION!
For more precise information, please contact your local representative.