KROHNE IFC 070 Converter EN - Manual (Page 18)

5
START-UP
18
IFC 070
www.krohne.com 11/2009 - 7311242200 - MA IFC 070 R02
• Check that the display lights up.
• Refit the metal strip at the bottom of the housing.
• Tighten the cable gland.
• Put the cover back.
• Tighten the 4 Allen bolts.
• Put the blue protection cap back.
WARNING!
Make sure that the battery cable is not jammed by the cover.
INFORMATION!
The instrument now operates with factory set parameters.
For configuration of these settings, please refer to the handbook and/or the documentation of
the converter.