KROHNE DW 181-182-183-184 EN - Manual (Page 5)

Installation and operating instructions DW 181 - 184 5
Product liability and warranty
The DW 18 flow meter is designed solely for measuring the flow rate of liquids without any gas
pocket. Special codes and regulations apply to its use in hazardous areas.
Responsibility as to suitability and intended use of these level gauges rests solely with the user.
Improper installation and operation of our level gauges may lead to loss of warranty.
In addition, the "General conditions of sale", forming the basis of the purchasing contract, are appli-
cable.
If you need to return the level gauge to the manufacturer or supplier, please refer to the information
given in Appendix B.
Items included with supply
The scope of supply encompasses, in the version ordered:
• Flow meter
Documentation supplied
• Installation and operating instructions (this manual) including description of special versions and
functions.
Official approvals and certificates
Application
Approved by Instrument version Certification mark
ATEX certification
INERIS DW 18 TYPE 18. Certificate no.
INERIS 03ATEX0045X*
*This EC-type Examination Certificate is available in KROHNE’s download centre on
http://www.krohne.com/.