APPLIED ENGINEERING Sonic Blaster - Manual (Page 62)

APPENDIX D
The Introplay Program
The file Introplay, found in the System/System.Setup folder
(subdirectory) of the Sonic Blaster program disk, will play the
sound file
Introsound as the GS/OS startup screen is displayed.
We’ve included an Introsound file but you can easily create
your own.
To use the Introplay program when booting from RAM, ROM,
hard disk, or any other boot disk, copy Introplay and
Introsound from the System/System. Setup subdirectory of
the Sonic Blaster program disk to the System/System. Setup
subdirectory of your boot disk.
If you're booting the program from your copy of the SB program
disk,
Introplay is already in place.
To create your own intro sound, run the Sonic master program
and save the file you want as your intro sound to the
System.
Setup folder in the System folder on your boot disk.
The file must be saved as an AE Format file called Introsound.
* Note: If you do not have the program setup correctly,
the computer will still boot but no sound file will be
played during the boot.
If you’re using the Startpic program to load a picture during
boot, the Introsound file will be played either before or after
Startpic depending upon which appears in the boot disk’s
directory first. If you want the picture loaded before the sound
file is played, copy
startpic to the boot disk before you copy
Introsound to the boot disk. You may also use a disk utility,
like ProSel, to arrange the order.
The Introploy Program 53