KROHNE OPTISENS OAS 2000 EN - Manual (Page 15)

INSTALLATION
3
15
OPTISENS OAS 2000
www.krohne.com 07/2010 - MA OAS 2000 R02 en
3.3.2 Two parameter measuring point
The figure above shows a two parameter measuring point consisting of one converter 1, two
sensors 4 with a telescopic rod immersion assembly as sensor holder 3 and one solenoid valve
2 for flushing.
Both sensors are flushed via one solenoid valve using an optional Y-splitter.
For connection of two sensors to the converter an optional junction box is needed.
1 Converter
2 Solenoid valve for flushing (to be ordered with converter)
3 Mounting assembly
4 Sensor incl. 10 m / 33 ft cable and flush hose
5 Junction box for connection of up to 4 sensors (to be ordered with converter)
6 Mounting post
7 Mounting plate with sun shield
.book Page 15 Friday, July 2, 2010 1:49 PM