KROHNE OPTISENS OAS 2000 EN - Manual (Page 11)

DEVICE DESCRIPTION
2
11
OPTISENS OAS 2000
www.krohne.com 07/2010 - MA OAS 2000 R02 en
2.2.1 Design
The sensor is manufactured with 316SS (SS2343) Stainless Steel. The head of the sensor is
designed to achieve the highest self-cleaning effect, providing an exact and reliable
measurement with the least possible maintenance under critical applications. The measuring
lenses within the housing are made of glass. The electronics and optics are protected in the
rugged casing, ensuring its reliability in very demanding environments.
The sensor has a fixed, shielded 10 m / 33 ft cable used for signal transmission between the
sensor and the converter. The cable sheath is made of Hytrel and is highly resistant to
aggressive materials and fluids.
The inline version of the sensor has a M12 connector to connect a standard
OPTISENS 2000 cable to the converter.
2.3 Nameplates
2.3.1 OPTISENS OAS 2000
INFORMATION!
Look at the device nameplate to ensure that the device is delivered according to your order.
Check for the correct supply voltage printed on the nameplate.
Figure 2-3: Nameplate OPTISENS OAS 2000 submersible version
1 Manufacturer
2 Device type
3 Order code
4 Serial number
5 Sensor information
OPTISENS OAS 2000
Suspended Solids/TS Sensor
Order code: VGA R 4 A112AA4A13A0
S/N: XX XX XXX
Material: 2343/316 SS
Flush Water/Air: 6 bar
Max. depth: 10 m
Max temp.: 60 C
Made in Sweden
1
2
3
4
5
.book Page 11 Friday, July 2, 2010 1:49 PM